EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER Set up: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is really a remarkably efficient solar controller designed for off-grid solar programs. Dependant on multiphase synchronous rectification technological innovation, it makes certain optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) programs.
Critical Features in the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Charge Controller technologies for top-quality solar Power harvesting. Key attributes contain:
Multiphase Synchronous Rectification (MSR) for improved Electricity conversion.
Advanced MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for enhanced battery life.
LCD Show with authentic-time data checking.
Several Load Regulate Modes together with guide and timer.
Thorough Electronic Protections towards overcharging, above-discharging, limited circuits, and reverse polarity.
Step-by-Step Guide to Setting Up the EPEVER Tracer AN Collection Controller
1. Unboxing and Preparing the Controller
Ensure all factors are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Verify the product range and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Pick out a very well-ventilated, dry spot near to the battery bank.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Sustain correct clearance for heat dissipation.
3. Wiring the Solar Demand Controller
Warning: Usually stick to suitable security protocols and ensure the procedure is run off right before connecting parts.
Stage one: Hook up the battery terminals to your cost controller (good to positive, detrimental to damaging).
Step two: Link the solar panel array to the PV enter terminals.
Phase three: Connect the load terminals if using a immediate load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
four. Configuring the Controller Options
Ability about the controller by connecting the battery initial.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild control.
five. Monitoring and Data Logging
The Tracer AN Sequence supports actual-time monitoring utilizing the MT50 Click Here remote meter.
Data is often logged by using the RS485 conversation port employing application including Photo voltaic Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
six. Troubleshooting Prevalent Problems
Issue one: No Power Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem 2: Around-Voltage Protection
Validate the solar array’s voltage score.
Change method parameters if needed.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations in the menu.
Advantages of the Tracer AN Collection with MSR Technological innovation
The multiphase synchronous rectification technological know-how ensures:
Larger Effectiveness: Minimized energy losses in the course of conversion.
Improved Trustworthiness: Steady general performance below variable hundreds.
More time Battery Lifestyle: Regular and precise charging profiles.
Conclusion
The EPEVER Solar Charge Controller with multiphase synchronous rectification technological innovation is surely an Outstanding choice for optimizing solar energy era and increasing battery life. By following the above mentioned set up guidebook, users can make sure optimum efficiency and method longevity.