EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Demand CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Charge Controller is usually a very successful photo voltaic controller suitable for off-grid photo voltaic systems. Depending on multiphase synchronous rectification technological know-how, it ensures optimized energy conversion and method balance for an array of photovoltaic (PV) apps.
Essential Capabilities of your EPEVER Tracer AN Collection Controller
The Tracer AN collection utilizes EPEVER Photo voltaic Demand Controller engineering for excellent photo voltaic energy harvesting. Important attributes include things like:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Highly developed MPPT Algorithm with >99% effectiveness.
Dual-Phase Charging for Improved battery daily life.
Liquid crystal display Exhibit with serious-time details checking.
Various Load Command Modes together with handbook and timer.
Detailed Digital Protections from overcharging, in excess of-discharging, limited circuits, and reverse polarity.
Action-by-Action Manual to Creating the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all parts are incorporated: Tracer AN device, temperature sensor, conversation cables, and user guide.
Confirm the product number and voltage ratings match your solar panel and battery specs.
2. Mounting the Charge Controller
Decide on a very well-ventilated, dry site near to the battery bank.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for warmth dissipation.
3. visit here Wiring the Photo voltaic Cost Controller
Caution: Constantly stick to correct protection protocols and make sure the technique is powered off before connecting factors.
Action 1: Connect the battery terminals into the cost controller (optimistic to good, negative to detrimental).
Phase 2: Join the photo voltaic panel array towards the PV input terminals.
Step three: Link the load terminals if using a immediate load relationship.
Phase 4: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Configurations
Energy around the controller by connecting the battery 1st.
Make use of the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Command Modes: Handbook, timer, light Handle.
five. Monitoring and Details Logging
The Tracer AN Series supports true-time monitoring utilizing the MT50 remote meter.
Details might be logged by way of the RS485 interaction port applying program for example Solar Station Computer system.
Remote checking is achievable Along with the EPEVER WiFi module.
six. Troubleshooting Common Issues
Issue 1: No Ability Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Difficulty 2: Around-Voltage Safety
Validate the solar array’s voltage ranking.
Alter system parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations during the menu.
Advantages of the Tracer AN Sequence with MSR Technological innovation
The multiphase synchronous rectification technology makes certain:
Higher Effectiveness: Reduced Strength losses throughout conversion.
Enhanced Reliability: Steady general performance under variable masses.
Longer Battery Lifetime: Constant and accurate charging profiles.
Summary
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification know-how is definitely an Remarkable option for optimizing solar power era and increasing battery lifetime. By following the above setup manual, buyers can make sure greatest performance and technique longevity.